BLOG I SHARING BIM PRACTICES
Tips & Tricks on BIM Application.
Revit® Professionals' FAQs & Answers.
Latest News on Tools for Revit® and BIM.
May 24, 2017 by Ieva Janulevičiūtė

Thanks to the enhanced Wood/Metal Framing Wall+, Floor+ and Roof+ software, you’ll be able to add customizable, complex dimensions with completely new dimensioning technology – Smart Dimensions.

Although in the past you could also add dimensions to your shop drawings automatically, with Smart Dimensions, you can configure them from the simplest variation, where dimensions will be added only to a predefined layer, to more complex variations, where all layers will be dimensioned.

April 27, 2017 by Ieva Janulevičiūtė

Recently, Team AGACAD has made quite a lot of significant changes in its Framing software for Revit to automate your work even more yet still provide flexibility. Who wouldn’t want to create and use different Detail configurations for the same Wall Type; calculate Gravity Points for Wall, Floor, or Roof panels; or customize complex dimensions with completely new Smart Dimensioning technology? You’ll be able to do all that and more!

Read on to find out the benefits of the enhanced versions of Wood/Metal Framing Wall+, Floor+, and Roof+.

January 04, 2017 by Renata Jočienė

If you’ve been hoping for a way to effortlessly and painlessly reposition studs, your ship has just come in. And even if you haven’t been on the lookout for it, you may want to climb aboard – this is the Queen Mary of stud placement.

It’s fast. It’s powerful. It makes life easier.

The newly released versions of Wood / Metal Framing Wall+, Floor+, and Roof+ contain a new option that allows you to position studs and joists not only in relation to each other but according to Revit gridlines. This special feature was developed at the request of our Norwegian users.

In the past, studs or joists had to be spaced following a predefined pattern, say, 24 inches apart, within each wall, starting from one end or the other or from both ends working toward the midpoint. An extra step was then required to make sure that studs were aligned.

But now, with new Align with Project Base Point feature, you can space and align all your studs at the same time! Project Base Point handles positioning in a more robust manner than before: instead of directly defining the spacing between studs, you just define the grid spacing, and the function takes care of the rest. Studs are positioned on the gridlines –and where necessary to fill in gaps or form intersections – so that they always match up across a corridor or room.

Notice how the studs are spaced according to the grid:

January 03, 2017 by Renata Jočienė

Want to see more detail in your shop drawings? Now you can, by creating Detail Views! This powerful function is included in the newly released versions of Wood / Metal Framing Wall+, Floor+, and Roof+. This special feature was developed at the request of our Norwegian users.

Back in the olden days, when you placed an assembly view on your shop drawing, you could see that assembly and all its parts in all their dimensioned glory. It was wonderful.

That was then.

This is now.

Say hello to Detail Views.

December 09, 2016 by Renata Jočienė

Our framing software for wood and metal floors has been updated in a lot of ways. From connections to stud size, from rendering shop drawings to cutting beams, there is a variety of upgrades in these products. Let’s take a tour and check out the new features of Wood Framing Floor+ and Metal Framing Floor+!

  • Floor Connections
    Even though the most popular floor end connections were already available, these weren’t sufficient because users often want to generate something unique. Take structural engineers. They’re always interested in reducing heat loss and saving materials, frequently by using special joins. Well, now we have good news for everyone who needs to make custom joins! Our newly-developed custom join function allows you to make virtually any connection type, save it, and use it in your projects.

November 14, 2016 by Renata Jočienė

Nowadays, people want fast results on construction site, i.e. quickly manufactured prefabricated walls, floors and roof. That’s why after long and hard work, we are finally putting finishing touches on a new product designed for prefabricated roofs – Wood Framing Roof+, which was awaited by many.

On this occasion, we are hosting a 45-min WEBINAR, which will be held on Thursday, November 17.

http://www.aga-cad.com/products/bim-solutions/wood-framing-roofWood Framing Roof+ enables quick and easy creation of prefabricated wood framing for roofs in Revit® models. Powerful features simplify creation of roof joists, battens, valley joists, roof boards and more. The software automates shop drawings, including the sorting, tagging, dimensioning and scheduling of all frames.

Wood Framing Roof+ frames prefabricated roof panels. Roof Panel Layout automates panel layout planning for architectural roof. The software draws symbolic lines according to predefined rules which indicate the way future panels will look like. Then it creates actual Revit® roof panels.

Possible workflow:

November 03, 2016 by Renata Jočienė

Roof Panel Layout is a powerful solution for prefabricated roof panels in Revit®. It enables easy roof panel planning and splitting into segments for prefabrication which can then be used in the roof framing process.

After getting a roof from the architects, we can use Roof Panel Layout to generate the panel layout planning. The software uses predefined rules to draw symbolic lines indicating the future panels. Then it creates real Revit® roof panels. Later Wood Framing Roof+ or Metal Framing Roof+ users can use these panels to create prefabricated framing, including rafters, battens, valley joists, roof boards, and so on.

September 23, 2016 by Renata Jočienė

Using Wood Framing Wall+ and Metal Framing Wall+, you can automate wall framing work in Revit and build complete shop drawings with dimensioning, part lists and material take-off automatically. Solution will collect all elements from one wall panel and make assembly with predefined views, add dimensions, add tags, make sheets and put the views into the sheets.

With new Wood Framing Wall+ and Metal Framing Wall+ version you will be able to generate more detailed shop drawings and have possibility to create multiple sheets for one wall panel. We received this request from our client Mr. Alar Oinus (Fint Engineering OÜ) who wants to provide more information about framed walls to fabrication process.

Assembly Views, Schedules and Sheets are now separated into different tabs which makes it ease to find and control them. Under Assembly Views, you can predefine assembly views, graphical representation, and framing layers you want to present. Now you can predefine different framing, connection or part tags for each view. Also every view now can have its own frame dimensioning rules, which include dimension styles and positioning. There are no limits to the amount of views!


June 30, 2016 by Renata Jočienė

AGACAD team has created a new application for Autodesk® Revit® to export multi-layered frames of wooden walls and floors to automated panel production lines.

Earlier AGACAD offered optional export to any separate Computer Numerical Control (CNC) machines, but from now on modelled timber house frames can be moved from Revit directly to large CAD/CAM production lines for mass production. When timber frame house building companies have a lot of orders and large volume of production capacity, production line greatly speeds up their work.

New Exporter is a separate software for Revit users that can automatically assemble all framing members in predefined ways and send all necessary data for flexible manufacturing of timber houses to CAD/CAM production line.

Today we offer CNC Exporters for the most popular production lines WEINMANN and Randek but this AGACAD software can be adapted for other producton lines of timber frame pre-fabricated house industry too.

How does productivity line work?

Thank you.

Make an Enquiry

(including country code)

I'm interested in:

* - Required fields