BLOG I SHARING BIM PRACTICES
Tips & Tricks on BIM Application.
Revit® Professionals' FAQs & Answers.
Latest News on Tools for Revit® and BIM.
March 29, 2019 by BIM Tree Chimpanzee

Join in this free webinar to see the flexibility of AGACAD’s Wood /Metal Framing solution for Revit, which has been enhanced by implementing some highly requested features.

In this 30-min webinar, you’ll see the extended possibilities for distributing studs and sheathing that will help you automate even more complex situations.

Also, you’ll have better control over Joined Opening framing, Top Plate Support, Bracing and more!

Expert Consulting: the 30-minute presentation will be followed by ~30 minutes of Q&A.

February 14, 2019 by Ieva Janulevičiūtė

The latest versions of AGACAD’s Wood/Metal Framing Wall BIM Solutions for Revit have been enhanced by implementing some highly requested features. Now they’re more flexible than ever with additional possibilities for distributing studs and sheathing to help automate even more tasks of your complex framing projects in Revit. Also, you’ll have better control over framing joined openings, top plate supports and more.

Let's dive in!

1. Align Stud Spacing with Frame and Opening Sides

With this new feature in Wood/Metal Framing Wall+, you’ll be able to distribute studs by a predefined spacing and restart the spacing at king studs or the sides of openings.

November 07, 2018 by Valensas Balsevicius

Smart Details is going to be phased out over the next few months. In its place, we present you Smart Connections, our newest BIM Solution for Revit, that brings additional functionality and more intuitive performance along with a name that more clearly reflects its main purpose.

IMPORTANT NOTE for EXISTING USERS of Smart Details! Although you can use the same configurations as you’ve been using with Smart Details, some of them might be disrupted due to changes in the software. Smart Details will still be available for a time so that you can finish your current projects and then modify your configurations for new projects so that they will mesh with Smart Connections.

The remainder of this post is dedicated to showing what configurations existing users of Smart Details may need to modify when transitioning to Smart Connections. For starters, when making the switch, you might need to modify your wall, column, and beam connection configurations.

For example:
If my Smart Details configuration was inserting corbels, column shoes, and bolts as shown below......the same configuration used with Smart Connections gives me this messy result.

That’s because the definition of faces of Columns and Foundation elements has been changed in Smart Connections. But this way it will be clearer and more systematic. So, to fix it, you will have to go in and redo that part of your configurations. Check the descriptions below for details on how to do that.

October 29, 2018 by Ieva Janulevičiūtė

AGACAD’s Wood Framing & Metal Framing software have been enhanced once again. Going forward, opening framing – king studs, trimmers, etc. – can be customized, and you can even create asymmetrical opening configurations. Also, you‘ll have more possibilities in framing walls with intersecting ridge and girder beams, splitting joists, and finally, selecting parts automatically.

As you may already know, it‘s been possible to create custom headers, sills, and top supports for some time now. Because of user feedback, we saw that this functionality was really appreciated, and so now we‘ve extended it, making it possible for you to design your own king studs and trimmers!

Moreover, by not ticking the “Kings are symmetrical” tick mark, you’ll be able to create asymmetrical framing for your opening.

For the left king:

And the right:

October 23, 2018 by Valensas Balsevicius

Our company continues the tradition of sharing information not only about our products but also about how to facilitate your everyday tasks in Revit. Below, our structural engineering maestro Valensas shares an insight about equality settings in Revit® dimensions.



In working with various clients, I’ve noticed there are some things that for experienced Revit users look simple but for beginners might be very frustrating.

Recently I’ve received a couple of questions from different users about how to get an Equality Formula in dimensions when they have several of the same dimensions on a dimension chain.

Let’s take a look at the settings we have in Dimension properties.

September 18, 2018 by Robert Prybyla

In this webinar we'll show how to use our Smart Assemblies BIM solution – and particularly its revamped Smart Dimensions feature – to further automate your shop drawings in Revit. Whatever your line of work (wood/metal framing, precast, etc.), if you have to make shop drawings, this webinar is for you. We invite you to join!

What you'll see in this webinar:

  • Automatic dimensioning rules in Smart Dimensions;
  • Available settings in Smart Dimensions and what they mean;
  • The difference between making dimensions using Smart Dimensions vs. the default settings of Smart Assemblies;
  • Examples of dimensioning in shop drawings used in various countries around the world.

May 16, 2018 by Robert Prybyla

Bobby Stiles, the founder of Florida-based Preconstruction with Stiles LLC, says his BIM modeling and metal stud consulting business got a big boost from AGACAD’s light gauge steel framing solutions for Revit®.

Client Profile

Preconstruction with Stiles LLC is a U.S. provider of BIM and as-built data services with special expertise in metal framing. The company works on public infrastructure (hospitals, airports, schools) and large commercial projects (retail, hotels, residential).

May 14, 2018 by Robert Prybyla

AGACAD’s framing and panelling solutions for Revit® have boosted the speed and quality of this Dutch design firm’s design and documentation work, also for BIM to fabrication, allowing it to offer more competitive project pricing.

Client Profile
A-BET BV is a design and BIM consulting firm based in the South Holland province of the Netherlands that specializes in metal framing.

April 04, 2018 by Valensas Balsevicius

The whole point of creating BIM models is to reap as much benefit from them as possible. One benefit for structural engineers is that when you create a physical model, you can create an analytical model simultaneously, saving you time later because you can send it straight to structural analysis software instead of creating it from scratch.

So, with that in mind, here is one tip about analytical lines for beams.

If you want to have a physical beam under another beam but keep the analytical lines at the same level, then use the z-offset in the beam properties instead of moving the beam down.

Analytical and physical model goes into the same location:

Thank you!

If you have not been contacted within 24 hours, please check your Junk folder.

Contact Us

I'm interested in:

We’d love to stay in touch and share information that could be helpful for you in your work. Typically we write about twice a month and you can unsubscribe at any time. Is that OK?

* - Required fields

This site uses cookies - they help us provide you with a better online experience. By using our website you accept that we may store and access cookies on your device. | Privacy policy X