All framing structural designers know that diagonal bracing is necessary because it keeps framed walls stable, preventing them from collapsing. Let-in bracing is the most widely used bracing system, but this bracing requires the studs be notched so that the brace will be flush with the stud surface. Using diagonal braces, these studs are typically cut at a 45- to 60-degree angle.
But sometimes designers need other type of cuts. For example, AGACAD client Optimera AS (which is supported by AGACAD's valued partner in Norway Focus Software AS), a significant distributor of building materials in Scandinavia, was looking for the possibility of making special cuts:
"We need cuts for diagonal nailers to be horizontal and not diagonal as shown in the pucture. Is this possible?"