BLOG I SHARING BIM PRACTICES
Tips & Tricks on BIM Application.
Revit® Professionals' FAQs & Answers.
Latest News on Tools for Revit® and BIM.
May 27, 2020 by Povilas Sindriūnas

Common Types of Roofs & How to Model Them in Autodesk Revit

Designing roofs in Revit can pose certain difficulties particularly for users less familiar with roof modeling tools. Creating exact roof geometry and size for a new build or modeling an existing roof to given dimensions is not always straightforward. If we follow some key principles, however, we can model quite a few roofs simply by using Revit's ‘Roof by Footprint’ tool. For more complex roof profile shapes, ‘Roof by Extrusion’ is typically used, which we will cover in future articles. Other ways of creating roofs are 3D massing using the ‘Roof by Face’ tool, which allows you to come up with a greater variety of complex roof designs, and In-Place Massing or Mass Families, which allows you to design irregular roofs and tensile roof structures.

For now, we’ll focus on some of the more common roof types used for small-scale residential, commercial, and industrial projects.

To create a simple hip roof with the ‘Roof by Footprint’ tool, follow the steps below.

  1. Have your perimeter walls and levels ready
  2. In Architecture tab select Roof – Roof by Footprint tool and choose desired roof type
  3. Choose a relevant level for a bottom face of the roof
  4. Use Pick Walls tools and hover over a wall – press tab to select all joined perimeter walls
  5. Define roof parameters like overhangs, slopes, offset from level, rafter cut
  6. Finish the roof by exiting roof editor



1. Use pick walls draw tool.

2. Each boundary line can be edited individulally.

3. Roof slope is defined in parameters.

4. Roof slope may be adjusted using grab handles.

5. Additional features can be added.


For a different variation of a hip roof, follow the same steps given above and adjust a few parameters as shown below.


1. Roof shape may be further manipulated .

2. Define overhangs and switch off slope parameter for gable end roof boundary lines .

3. Wall can be attached to follow roof line.








4. Select multiple walls and use Attach Top/Base function.
In the next example we will see how dormers, mono pitches, and double-pitch gable end roof types can be modeled using the 'Roof by Footprint' function. To achieve these more complex shapes, again, follow the steps given in the first example and adjust some settings.

1. Roof pitches can be manually adjusted using grab handles.

2. Prepare walls and levels for entire house.

3. Add roof by footprint by selecting external walls.


4. For triangular dormers add one boundary line for each slope of dormer.

5. Add slope arrows for each boundary line pointing to each other.













6. Use Slope Arrow from Draw tools set.




7. Remove slopes where gable ends are desired (untick 'define slopes').

8. Rafter Cut type, Slope and Constraint parameters can be changed.

9. Select walls from lower levels and attach to roof. You can also create walls at the relevant attic level and attach them.

10. To make a double pitch dormer roof, create roof by footprint at corresponding level, untick slope parameter for gable end boundary line, connect corners, draw a new line at the back and switch off slope parameter, and attach gable end wall to roof.


11. Use Join/Unjoin Roof function in Geometry tab and select both main roof and dormer roof – then create a dormer opening for the main roof. Pick roof/wall edges and trim corners of model lines.

12. For mono pitch dormers repeat the process, but remove slope definition and instead add a slope arrow, which can be further defined in properties.

13. For remaining mono pitches repeat same process, and either use a slope arrow or add a slope to one of the perimeter roof boundary lines. Cut roof openings as in previous example.

14. To create a roof sweep, add roof by footprint and remove slope definition from inner boundary lines. Pitch can be adjusted.



To create a hip dormer roof or a half hip roof, create roof by footprint as in previous examples and follow these steps.


1. Create roof with slope definition for all three external boundary lines.


2. For a half hip gable end – split entire line into three and remove slope definition for two side boundary lines.








3. Define slope for middle boundary line and write in Offset From Roof Base parameter.

4. The result is half hip roof with dormers.
Other types of dormers can be created following the same principles as in previous examples. Use create roof by footprint and add additional features as shown below.

1. Pick external walls to create roof – break down boundary lines to define where your dormers will be.

2. Add a 10 degree slope to middle boundary line with boundary lines on each side without slope definition and with slope arrow.

3. Keep a zero offset from roof base for the first and last boundary lines.


4. Gradually increase offset for next two lines going towards the centre – 1000mm offset.


5. Use 1200mm Offset From Roof Base for top of the dormer roof line.


6. Cut dormer opening for the main roof by picking walls within the perimeter.

7. Create roof by footprint for the top piece and attach walls to roof if needed.

8. For inverted roof add negative slope value to side boundary lines.

9. Inverted roofs can be applied to different scenarios and further modified.


To model a mansard type of roof, Revit lets you define a cutoff level where roof is cut horizontally and additional roofing can be created from the cutoff level upwards. Let’s look into this more closely using the following example.



1. Create a new level for roof cutoff.

2. Draw a roof by footprint and specify cutoff level.

3. Specify slopes and overhangs.

4. Join walls to roof.

5. Use rectangle tool to draw new roof by footprint at new pitch angle.





6. Specify base level at cutoff level.





7. Draw additional double pitch roof at cutoff level.
















8. Cut dormer openings for both roofs.










9. Draw walls and attach to both roofs.

10. Instead of attaching walls to roof alternatively wall profile lines can be edited.

11. Revit Roof tool set lets you add soffits, fascia, and gutters to an existing roof by picking the roof edge line.


Irregular double pitch roofs are also quite simple to create. Keeping in mind the steps taken in the examples above, draw walls and create roof by footprint at the relevant level.



1. Split gable end boundary line in two .



2. Add slope arrows pointing toward each other.

3. Define slope arrow parameters.

4. Prepare dormer walls and draw roof.

5. Join two roofs and cut dormer opening in the main roof.


Modeling roofs by footprint may also be used for other typologies. An array of mono pitch roofs can be designed so that it allows clerestorey windows to be placed at intervals.


1. Side walls can be adjusted by manipulating profile line to desired roof line.

2. Draw a roof rectangle and add slope arrow.





3. Split side boundary lines and add slope arrows to meet at desired distances.

4. Roof pitches and overhangs can be further manipulated.


Another example of using the cutoff level parameter is when you're joining two roof types. In this case we have a hip roof and gable end roof hybrid. As in previous instances, prepare external walls on which the roof is going to be modeled. Make sure you have levels at the correct heights.

1. Draw a roof with cutoff level at desired height .

2. Draw a double pitch roof with base level at cutoff level. Attach gable end walls to roof and create side walls.

3. Create dormer opening for the main roof by picking boundary lines of upper roof and side walls.


So, above we've seen how various roof types can be created using the 'Roof by Footprint' tool in Revit, but even more intricate details can be added to those roofs. Come see how to fully frame a Revit roof, produce shop drawings, and export to CNC in our FREE WEBINAR about framing roof panels, trusses, and rafters on June 3, 2020.

We also invite you to download our TOOLS4BIM Dock to take a FREE TRIAL of either our Wood Framing Roof or Metal Framing Roof tools. And we encourage you to ask for a complimentary personal demonstration of the framing software with one of our BIM consultants. Just send us a note, and we'll take it from there.




Subscribe to our BLOG newsletter and stay updated on upcoming free webinars, Revit tips & tricks, and the latest news on AGACAD TOOLS4BIM development and applications!

Related blog posts:

Thank you.

If you have not been contacted within 24 hours, please check your Junk folder.

Contact Us

I'm interested in:

We’d love to stay in touch and share information that could be helpful for you in your work. Typically we write about twice a month and you can unsubscribe at any time. Is that OK?

* - Required fields

Contact Us

We’d love to stay in touch and share information that could be helpful for you in your work. Typically we write about twice a month and you can unsubscribe at any time. Is that OK?

* - Required fields

Thank you for your demo request.

Our customer service will get in touch with you within 24 hours.

Don’t waste time on reading technical documentation and see that this is the solution for you! Our Expert will frame a part of your project, demonstrate software functionality and share the best practice and efficient way of framing, taking into account your current needs.

Duration: 1 hour
Cost: 250$/250€

Register to start framing with our Expert

Questions or special requests:

You will leave the demonstration with:
- Part of your project already framed;
- Your questions answered;
- 14-days software trial;
- Support during the trial period.

Thank you for your trial request.

Our customer service will get in touch with you within 24 hours.

With a paid trial, which is called an Initial Implementation Plan, our professionals will help you quickly discover how this software will benefit your design process.
Our BIM consultant will demonstrate software functionality, share best practices, and show the most efficient way of framing your project according your current needs. Plus, you’ll get an extended trial period, sample Revit families and configurations.

Cost: 750$/750€
This cost will be deducted from the product price should you decide to purchase the software.

Register to start a paid trial

Questions or special requests:

Initial Implementation Plan includes:
- Revit project with sample families & configurations
- Research on your framing standards (1 h)
- Personal training via online meeting (2 h)
- 30-day software license and support

This site uses cookies - they help us provide you with a better online experience. By using our website you accept that we may store and access cookies on your device. | Privacy policy X