BLOG I SHARING BIM PRACTICES
Tips & Tricks on BIM Application.
Revit® Professionals' FAQs & Answers.
Latest News on Tools for Revit® and BIM.
February 25, 2016 by Inga Ibenienė
Webinar has ended, but its recording is available upon request on events@aga-cad.com.

While working on a project as a team, there are often cases when it becomes difficult to control the BIM processes because the designing is carried out using different software or in different planes of the same software. Communication problems are especially noticeable when you need to cut holes in architectural elements of Revit® project.

A variety of software in BIM team leads to differences in openings upon upload. Therefore, we want to show you several different ways of opening insertion that are adapted to various BIM teams’ working methods.

Revit users spend a lot of time adding and tagging openings manually, but using our BIM solution, Cut Opening, they can cut holes for MEP elements in structural elements automatically. Cut Opening is adapted to various workflows of BIM teams. It doesn’t matter what way you choose to make your project - using only Revit or Revit and oter software - with Cut Opening you can add holes easily and quickly in any case. Take part in our latest webinar and see for yourself that it is true.

Holes in Structures for MEP Elements - 3 BIM Workflows

Live on Thursday, March 3rd, 2016


In this 45 minute webinar, you‘ll see how Cut Opening application can be adjusted to different workflows of a BIM team. Main topics that are relevant for Structural Engineers, MEP Engineers, and Architects:

  • Workflow to cut holes in simple Revit File;
  • Workflow to cut holes in Linked Revit File (both ways: Architecture linked into MEP & MEP linked into Architecture);
  • Workflow to cut holes for IFC MEP elements.

Solution:

Webinar presenter:

Cut Opening

This BIM solution defines and reserves spaces in Revit models for ducts, pipes, cable trays and conduits. Structural engineers and architects can then review, revise, and create the approved holes with just one click.

Corresponding openings are designed automatically based on the location and types of clashes detected for MEP elements in current, linked, or IFC files.

Jokubas Vaisvila
BIM Application Engineer

HVAC Engineer
Certified Autodesk Revit MEP Professional
AU 2014 Speaker

Reserve your Webinar seat and bring all your questions to this live session. Registration is required.

If the webinar time is not convenient for you, you should still register, so that we could send you a link to the webinar’s recording, which you will be able to watch at your earliest convenience.

REGISTER NOW!

AMERICA EUROPE / AFRICA AUSTRALIA / NEW ZEALAND / ASIA
Thu, Mar 3, 2016
10:00 AM – 10:45 CDT (GMT-06) Central Time (the USA and Canada)

RegistrationButton




Thu, 3 Mar, 2016
There will be two sessions held –
please choose the time that suits you best.

10:00 AM – 10:45 AM CET (GMT+01) Amsterdam, Berlin, Stockholm
RegistrationButton

4:00 PM – 4:45 PM BST (GMT, UK time) RegistrationButton
Thu, 3 Mar, 2016
8:00 PM – 8:45 PM AEDT (GMT+11) Canberra, Melbourne, Sydney

RegistrationButton




Don't forget to check your local time!

Shortly about the webinar:

We organize online events using GotoWebinar, a web conferencing service. During the webinar we will show our software possibilities on your monitor, and you will be able to ask questions via chat messages, the microphone or calling by your telephone.

After the registration you'll get a confirmation email with the link to join the webinar. At the time of the event, click this link to join it. After GotoWebinar software installation (it's free for you and it takes only a few minutes) you'll see a view of our display.

Note: Please make sure you have your speakers turned on during the webinar, as audio will be shared via your speakers. You can also call us.

If you have any questions or comments, please contact us by email events@aga-cad.com.

Thank you.

Make an Enquiry

(including country code)

I'm interested in:

* - Required fields

Thank you for your demo request.

Our customer service will get in touch with you within 24 hours.

Don’t waste time on reading technical documentation and see that this is the solution for you! Our Expert will frame a part of your project, demonstrate software functionality and share the best practice and efficient way of framing, taking into account your current needs.

Duration: 1 hour
Cost: 50$/50€

Register to start framing with our Expert

You will leave the demonstration with:
- Part of your project already framed;
- Your questions answered;
- 14-days software trial;
- Support during the trial period.

If you have any questions or requests, please feel free to contact us via email info@aga-cad.com